60KW DSP Medium Frequency Induction Heating Machine For Shrink Fitting
WHAT IS INDUCTION HEATING:
Induction heating is a proven; precise, repeatable and efficient heating method that can be easily integrated into your production process.
Induction Heating offers a controllable and localized method of heat without contact to the parts (components) being heated. The heat is generated by inducing an alternating magnetic field into electrically conductive materials.
WHAT IS INDUCTION SHRINK FITTING:
Induction shrink fitting refers to the use of induction heater technology to pre-heat metal components between 150 °C (302 °F) and 300 °C (572 °F) thereby causing them to expand and allow for the insertion or removal of another component. Typically the lower temperature range is used on metals such as aluminium and higher temperatures are used on metals such as low/medium carbon steels. The process avoids the changing of mechanical properties whilst allowing components to be worked. Metals typically expand in response to heating and contract on cooling.
The parameters of 60KW DSP Medium Frequency Induction Heating Machine For Shrink Fitting :
| Model | GYM-DSP-60AB (Three phase) |
| Work power | 340v-430v |
| Max input current | 90A |
| Max output power | 60KW |
| Fluctuating frequency | 1-10KHZ |
| The flow rate of cooling water | 0.15-0.3Mpa 9L/Min |
| Water temperature protection point | 40C |
| Product size | main :940x580x1020 mm |
| transformer :870x430x750 mm |
| Net weight | main : 115 kg |
| transformer : 76.5 kg |
THE ADVANTAGES OF THE INDUCTION HEATING MACHINE:
- Process controllability - Unlike a traditional electric or gas furnace the induction system requires no pre-heat cycle or controlled shutdown. The heat is available on demand. In addition to the benefits of rapid availability in the event of a downstream interruption to production, the power can be switched off thus saving energy.
- Energy efficiency - Due to the heat being generated within the component energy transfer is extremely efficient. The induction heater heats only the part not the atmosphere around it.
- Process consistency - The induction heating process produces extremely uniform consistent heat this often allows less heat to be used for a given process.
- No naked flame - This allows induction heating to be used in a wide variety of applications in volatile environments in particular in petrochemical applications.
We have established an R&D system. It is supported by advanced engineers and professional workers, who are especially engaged in researching and developing the machinery of middle or high frequency induction heating and high frequency inverter electrolysis and galvanization power supply. Since we owned strong technique development capability, our factory has been insisting on producing new product and new craftwork to assure our leading position on technique in this field.
Under the effort of several years, our factory has produced series of high quality products in various categories. We can also exclusively produce these products on your requirement to meet you need. Our middle or high frequency induction heating equipment is produced for special voltage condition of some countries. For instance, there is single-phase 110V, three-phase 220V induction heating equipment for America and Japan and three-phase 415V, 440V induction heating equipment for such southwestern Asia countries as Malay and Thailand.
Product Tags:
|
|
DSP Medium Frequency Induction Heat Treatment Machine 60KW For Shrink Fitting Images
|
